products

Products

General Purpose Controller HLEC

Closed-loop and open-loop control for hydraulic components

Operating Voltage:8V-36V DC

  • Series Characteristics
  • Parameter Specification
  • Application Scenario Display
  • Mail Inquiry

• Outstanding current control accuracy and response time for the electromagnetic coil.
• High-performance 32-bit ARM Cortex-M4 MCU, master frequency up to 168MHz.
• Wide voltage range: 8V~36V.
• Suitable for harsh operating temperatures: -40℃ ~+75℃.
• Port protection and fault detection.
• IP66/ IP67 protection grade.
• Rigorous EMC and reliability testing standards.
• C/ Simulink development environment available.

Working voltage8V-36V DC
Working temperature-40℃ ~+75℃
Storage temperature-40℃ ~+85℃
Relative temperature45%~90%
Preventive gradeIP66/67
Electrical protectionPower port input anti-reverse protection, output overcurrent short circuit protection.
Signal port input/ output overvoltage and overcurrent protection.
Communication modeCAN2.0B
Unit dimensions141.7mm*123mm*40.4mm
Port resourcesCAN2.0B
10HZ~15KHZ frequency input *4
Resistive analog input *4
Analog input, 0~5 V or 4~20 mA*7
Switch input *8
3.2A LOW-SIDE proportion output *4
2A high level switch output *8
0~5V/ 30mA adjustable analog output *2
5V/ 150mA fixed analog output *2
13mA low level drive *3
2209129-1/TE/64PIN2209129-1/TE/64PIN
Type of product testHigh and low temperature test, temperature and humidity test, vibration test,impact test, drop test, salt spray test, EMC test.


Email:
Tel:
Message